Installation and Operation Manual
Chapter
4 Configuration
ACE-3105, ACE-3205 Ver. 5.2
Additional Tasks and Options 4-139
ACE-3205 - RAD Data Communications
Utilities> File Utilities> File System>
1. Dir
2. Swap
3. Save default configuration file
4. Delete default configuration file
>
Please select items <1 to 4>
ESC-previous menu; !-main menu; &-exit
Figure
4-104. File System Menu
3.
Select Save default configuration file.
The current device configuration is saved internally as the default
configuration using the *.cfg file extension.
³
To delete the default configuration file:
•
From the File System menu, select Delete default configuration file.
The default configuration file is deleted and the factory-default
configuration is used instead.
Restarting/Resetting the Unit
ACE-3105, ACE-3205 supports two types of initialization operations:
•
•
Resetting the Unit to Configuration Defaults
.
Restarting the Unit
When necessary, you can restart the ACE-3105, ACE-3205 unit. Restarting ceases
any current operation, reloads the application file and initiates a device self test.
Restarting the unit does not affect configuration settings.
³
To restart ACE-3105, ACE-3205:
1.
From the Utilities Menu (Main Menu> Utilities), select Device reset.
A confirmation message appears:
Are you sure? (Y/N)
.
2.
Type Y to confirm the device reset (restart).
ACE-3105, ACE-3205 restarts by reloading its software and performing a
self test.
Note
