ACE-3105, ACE-3205 Ver. 5.2
Configuration Sequence
4-1
Chapter
4
Configuration
This chapter explains in detail the different configuration options available for
ACE-3105, ACE-3205.
4.1
Configuration Sequence
Manual Configuration
The initial configuration of ACE-3105, ACE-3205 consists of three main
configuration stages (assuming there are no ready-made configuration files for
download):
1.
Configuring for Management (see
) – Setting initial system
parameters that are required for enabling remote/local management access
to the unit. This includes:
Configuring the terminal control
Entering device information, router parameters, authorized managers,
and management access definitions
Setting the date and time – to allow accurate logging of system events
Configuring the system log (Syslog) – to allow logging/sharing of system
events on a server.
2.
Configuring for Operation (see
) – Setting the parameters required
for functioning in the network application:
Configuring the physical layer parameters
Setting port protection
Defining the master and fallback clock
Configuring the logical layer (PPPoE) parameters (optional)
Configuring the application parameters, which include DSL, ATM, bridge,
router interface, remote peers (including static routes if necessary), MPLS
and multiservice over PSN parameters.
Figure
4-1. Configuring the Unit for Operation
3.
Additional Tasks (see
) – Displaying the inventory, resetting the
unit and managing the file system.
