Installation and Operation Manual
Chapter
4 Configuration
ACE-3105, ACE-3205 Ver. 5.2
Configuring for Management 4-3
ACE-3205 – RAD Data Communications
Configuration> System
1. Clock >
2. Management >
3. Terminal >
4. Date and time >
5. Syslog >
6. Factory default
>
Please select item <1 to 6>
ESC-previous menu; !-main menu; &-exit
Figure
4-3. System Menu
Table
4-1. System Menu Parameters
Parameter Description
Possible
Values
Clock
Access the system's timing
synchronization definitions (ATM/PSN
clock options)
Refer to
Management
Access the general management
parameters
Refer to
Terminal
Access the terminal control
parameters
Refer to
Date and time
Access the date and time definition
Refer to
Syslog
Access the Syslog options for
logging/sharing system events on a
server
Refer to
Factory default
Resets all configuration parameters to
their factory-default settings
Refer to
Configuring the Terminal Control
The terminal control parameters determine the control port's baud rate,
password used for each control session, and availability of the fixed security
timeout.
³
To access the Terminal menu:
•
From the System menu (see
), select Terminal.
The Terminal menu is displayed.