Concise User’s Guide
1-
4 - System Startup
English
System Startup
1.
Remove all packing materials.
2.
Place the computer on a stable surface.
3.
Insert the battery and make sure it is locked in position.
4.
Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.
5.
Attach the AC/DC adapter to the DC-In jack at the rear of the
computer, then plug the AC power cord into an outlet, and
connect the AC power cord to the AC/DC adapter.
6.
Use one hand to raise the lid/LCD to a comfortable viewing
angle (do not to exceed 135 degrees); use the other hand (as
illustrated in
Figure 1
) to support the base of the computer
(
Note
:
Never
lift the computer by the lid/LCD).
7.
Press the power button to turn the computer “on”.
System Software
Your computer may already come with system software
pre-installed. Where this is not the case, or where you are
re-configuring your computer for a different system, you
will find this manual refers to
Microsoft
Windows
10
.
HDD RAID Support
Your hard disk(s) can be set up in AHCI mode or RAID
mode (for increased performance or protection). Note
that setting up your hard disk(s) in RAID mode needs to
be done prior to installing the
Windows
Figure 1
Opening the Lid/LCD/Com-
puter with AC/DC Adapter
Plugged-In
Shut Down
Note that you should
always shut your com-
puter down by choos-
ing
Shut Down
from
the
Start
Menu.
This will help prevent
hard disk or system
problems.
www.acecomputers.com
Summary of Contents for Mustang W650R
Page 1: ......
Page 60: ...Disassembly 2 28 2 Disassembly www acecomputers com...
