ACE Americas INC,
3250 NE 1st Ave STE305, Miami, FL 33137, USA
samuel.rahlke@ace-technik.com
HEARING STRANGE SOUNDS FROM YOUR HEARING PROTECTOR?
This happens when you leave your Sordin on while not wearing it. The microphones are picking up audio from
the loudspeakers which leads to audio feedback. Make sure to turn off the device when it is not in use.
NEED TO CHANGE THE EAR PADS?
Take two fingers and insert them between the edge of the ear pad and the foam lining inside the ear cup. Pull
the ear pad away from the cup. Do not use sharp devices or tools to remove the ear pad as this may damage
the cups or electronics inside.
HAVE YOU PURCHASED A SLIM SORDIN AND WANT TO USE IT WITH AN ARC RAIL COMPATIBLE HELMET?
If you have a Slim Sordin with a leather headband and want to attach it to the ARC rail adapter, a few extra steps
are required. First, detach the cups from the headband by unscrewing the cap at each attachment point, four in
total. The cups will now be removed from the headband, but the wire is still attached to the leather headband.
The wire has been sewn into place in the leather headband, carefully cut the leather until the wire is free. Be
careful to not cut into the rubber coating of the wire. The ARC rail adapter can now be attached to the cups by
screwing the caps at each connection point, like the original mounting.
DID THE ABOVE STEPS NOT SOLVE YOUR PROBLEM?
If you are still having trouble with your device, please get in contact with the retailer or dealer you purchased
your Sordin from.
Please note that improper usage or aftermarket modification can void the warranty.
