Acecad DigiMemo 692, User Manual

files it contains. 

To reset the built-in 32 MB storage device, execute the following steps: 

1.  While the digital pad is turned off, press and hold the 

Erase

 button 

  on the pad. 

2.  Meanwhile, press and hold the 

Power

 button on the pad until the 

 icon 

appears on the display. Release the 

Power

 button. 

3.  Then release the 

Erase

 button 

. 

Note! 

Do not format the built-in 32 MB storage device through the format function in 
computer. Or it will cause the incompatibility problem with the pad. 

The Damage of the Built-in 32 MB Storage Device 

If the error code 

E03

 appears on the display of the digital pad, it indicates that the built-

in 32 MB storage device may be damaged. It needs to be repaired. Please contact the 
ACECAD distributor. 

The File System Incompatibility of an Optional CF Memory Card 

If the error code 

E02

 appears on the display of the digital pad, it indicates that the file 

system of the optional CF memory card is incompatible with the digital pad. If you want 
the digital pad to capture and store your handwriting in this optional CF memory card, 
please format this memory card before use. 

Note! 

Formatting an optional memory card permanently deletes all data and files it 
contains. Before formatting, be sure to transfer to a computer any files you 
would like to keep. 

To format an optional CF memory card, execute the following steps: 

1.  Load the memory card into the digital pad. 

2.  Turn on your computer and start computer. Connect the pad to your computer. 

3.  Format the memory card with the file system 

FAT

 in computer. 

Note! 

The digital pad only supports an optional CF memory card with the file system 
FAT. The digital pad does not support an optional CF memory card with other 
file system. 

The Damage or Incompatibility of an Optional CF Memory Card 

If the error code 

E01

 appears on the display of the digital pad, it indicates that the 

optional memory card may be damaged or the memory in the memory card is 
incompatible with the digital pad. You can not use it with the pad. 

Troubleshooting 

Problem: 

A superimposed digital page is created. 

Solution: 

Make sure to select a blank digital page each time you change a page on 
paper. 

Problem: 

Minor lengthened or shortened digital ink strokes occur   

Solution: 

Write a little bit slowly or harder. 

19