27
Packet Aggregation:
The parameter can be used to increase the delivered bandwidth in community networks
including fixed and mobile stations.
WMM Support:
Enable/disable the WMM support.
802.11h Support:
Enable/disable the 802.11h support.
Channel Switch Period:
If you enable 802.11h Support, specify the channel in beacon value.
HT Operation Mode:
Mixed mode operation: In this mode, both the MIMO-OFDM systems and the legacy
systems shall co-exist. The MIMO system should have the capability to generate legacy packets for the legacy
systems and high throughput packets for MIMO-OFDM systems. So, the burst structure should be decodable to
legacy systems and should provide better performance to MIMO-systems.
Green field mode operation:
This mode is similar to mixed mode where the transmission happens only between
the MIMO-OFDM systems in the presence of legacy receivers. However, the MIMO-OFDM packets transmitted in
this mode will have only MIMO specific preambles and no legacy format preambles are present.
HT Channel Bandwidth:
Specify the channel bandwidth.
HT Guard Interval:
Guard-interval is used to reduce interference of multi-path channel. Specify the guard interval
is 400 ns or 800 ns to increase throughput.
HT TX Aggregate MSDU:
This option allows aggregation of multiple MSDUs in one MPDU.