background image

1   Introduction

Indications

The Yomper is exclusively designed to provide assistance for manual wheelchairs, giving people with reduced mobility the possibility 

of moving around while reducing effort, for a user weight ranging from 14 to 150kg. Its use is exclusively reserved for people capable 

of physically and mentally using a manual wheelchair (moving forward, maneuvering, and braking), alone or accompanied by a third 

person taking charge of powered assistance.

The Yomper can also be used in push assistance mode for a for an accompanying person by using an optional device for a third party.

The accompanying person must be physically and mentally capable of maneuvering (forward, backward, turning, braking) the manual 

wheelchair with a person seated in the wheelchair.

The Yomper must be installed on a compatible manual wheelchair. See «Wheelchair compatibility» in Technical data, page 26 of the 

manual.

The Yomper must be installed by a professional. It is that person’s responsibility to ensure the user’s ability to safely operate the Yomper.

Contre-indications

Improper use of the Yomper or the wheelchair to which it is attached, depending on the surface, climate, traffic conditions, may 

present a potential danger and cause damage to the wheelchair, the Yomper or the user. The Yomper should be handled and used 

according to the following recommendations:

The user is physically and mentally able to use a wheelchair and the Yomper in all conditions and situations

The user has understood and read the entire instruction manual

No technical changes have been made to the equipment

The user should take the time to learn the performance of the Yomper by using it in a secure area free from any danger. The user 

should become familiar with the feeling of pushing, braking, acceleration and maximum speed of the equipment before venturing 

outdoors where risky situations can arise. Users are strongly advised not to use the Yomper outdoors until they are comfortable indoors.

If a malfunction appears, stop using the Yomper and contact the technical service department of your supplier/dealer. Any use that 

does not comply with the instructions in the manual, or with the recommendations of your supplier/dealer, or with the technical limits 

defined by your supplier of the Yomper or the wheelchair is considered to be misuse of the Yomper.

ACEKARE is not responsible for any property damage or bodily injury that may occur as a result of improper use of the Yomper or, 

failure to follow the instructions in the user guide.

If you have any problems understanding the warnings and instructions in this manual, please contact your distributor or local supplier/

dealer.

2

Summary of Contents for YOMPER+





























Reviews: