13
III-2.
Mounting the access point to a ceiling
To mount the access point to a ceiling, please follow the instructions below
and refer to diagram
A
&
B
.
For Wooden Ceilings (refer to diagram A):
1.
Place the ceiling mount bracket to a ceiling in your desired location and
insert screw
iii
through hole
i
(x 2)and tighten to fix the bracket in place.
2.
When the ceiling bracket is in place, inset screw
iv
into hole
v
(x 2) on the
access point.
3.
Fix the access point to the ceiling bracket by inserting the attached screws
iv
into hole
vi
and twisting the access point.
4.
Lock the access point firmly into place when by twisting it to align screws
iv
with the grooves in the ceiling mount.
For Other Ceilings (refer to diagram B):
1.
Place the ceiling mount bracket to a ceiling in your desired location and
Insert screw
ii
through hole
i
(x 2) and tighten to fix the bracket in place, as
shown in
A
.
2.
Insert screw
iii
through hole
i
and into the rear of screw ii and tighten to
provide additional strength.
3.
When the ceiling bracket is in place, insert screw
iv
into hole
v
(x 2) on the
access point.
4.
Fix the access point to the ceiling bracket by inserting the attached screws
iv
into hole
vi
and twisting the access point.
5.
Lock the access point firmly into place by twisting it to align screws
iv
with
the grooves in the ceiling mount.
Summary of Contents for EW-7476HPC
