Chapter 3
89
23. Carefully pry loose and remove the touch pad board.
WARNING:The touchpad board is glued to the upper case, only remove the touchpad board if it is defective.
Removing the main board
1.
See “Removing the Battery Pack” on page 60.
2.
See “Removing the SD dummy card” on page 60.
3.
See “Removing the PC and ExpressCard dummy cards” on page 61.
4.
See “Removing the Lower Cover” on page 62.
5.
See “Removing the DIMM” on page 63.
6.
See “Removing the WLAN Board Modules” on page 64.
7.
See “Removing the Hard Disk Drive Module” on page 65.
8.
See “Removing the Optical Drive Module” on page 66.
9.
See “Removing the Modem Board” on page 70.
10. See “Removing the Heatsink Fan Module” on page 70.
11. See “Removing the CPU and VGA Heatsink Module” on page 71.
12. See “Removing the CPU” on page 73.
13. See “Removing the VGA board (for Discrete model only)” on page 74.
14. See “Removing the Middle Cover and the Power Board” on page 75.
15. See “Removing the Keyboard” on page 77.
16. See “Removing the LCD Module” on page 79.
17. See “Separating the Upper Case from the Lower Case” on page 82.
18. Disconnect the Bluetooth cable from the BLUE1 connector on the main board.
Summary of Contents for 5520 5929 - TravelMate - Turion 64 X2 2 GHz
