57
Chapter 2
The table below describes the parameters in this screen. Settings in
boldface
are the default and suggested
parameter settings.
NOTE:
The sub-items under each device will not be shown if the device control is set to disabled. This is
because the user is not allowed to control the settings in these cases.
Parameter
Description
Format/Option
System Time
Sets the system time. The hours are displayed with
24-hour format.
Format: HH:MM:SS
(hour:minute:second) System Time
System Date
Sets the system date.
Format MM/DD/YYYY
(month/day/year) System Date
System Memory
Displays the system memory size. Memory size is
fixed to 634KB
Extended Memory
Displays the total size of the installed memory.
Video Memory
Displays the video memory size.
Quiet Boot
Determines if the Customer Logo and Summary
Screen will be displayed or not during boot up.
Enabled: Customer Logo is displayed, and
Summary Screen is disabled.
Disabled: Customer Logo is not displayed, and
Summary Screen is enabled.
Option:
Enabled
or Disabled
Network Boot
Enables, disables system boot from LAN (remote
server).
Option:
Enabled
or Disabled
F12 Boot Menu
Enables, disables the Boot Menu during POST.
Option:
Disabled
or Enabled
Wake-up on LAN
Enables, disables remote wakeup (power on) via
LAN.
Option:
Enabled
or Disabled
D2D Recovery
Enables, disables the D2D Recovery function. This
function allows the user to create a hidden partition
on hard disc drive to store the operation system
and restore the system to factory defaults.
Option:
Enabled
or Disabled
Summary of Contents for 5520G
