59
Chapter 2
USB Self-Healing
The USB Self-Healing screen displays all USB self-healing options and settings.
Integrated Devices
The Integrated Devices screen displays all options and settings for integrated devices.
Parameter
Description
Option
Self-Healing
Enables, disables the USB self-healing
function.
Disabled
or Enabled
OHCI Self-Healing:
(Open Host Controller Interface - supports USB 1.1 devices)
Duration of Port Reset in MS
Sets the port reset duration.
Enter numeric value (Default:
15
)
Reset Recovery Time in MS
Sets the recovery duration following a reset.
Enter numeric value (Default:
30
)
Device Power Good Time in MS
Sets the interval between power on and
system availability following a reset.
Enter numeric value (Default:
100
)
Attach Signal Debounce in MS
Sets the debounce interval after a USB
device is connected.
Enter numeric value (Default:
100
)
EHCI Self-Healing:
(Enhanced Host Controller Interface - supports USB 2.0 devices)
Duration of Port Reset in MS
Sets the port reset duration.
Enter numeric value (Default:
20
)
Reset Recovery Time in MS
Sets the recovery duration following a reset.
Enter numeric value (Default:
17
)
Device Power Good Time in MS
Sets the interval between power on and
system availability following a reset.
Enter numeric value (Default:
100
)
Attach Signal Debounce in MS
Sets the debounce interval after a USB
device is connected.
Enter numeric value (Default:
100
)
Parameter
Description
Option
USB Control
Enables, disables USB controllers.
USB1.1+USB2
, USB1.1 or
Disabled
USB2 Control
Enables, disables USB2 controllers.
USB1.1+USB2
, USB1.1 or
Disabled
Legacy USB Support
Enables, disables support for Legacy USB.
Enabled
or Disabled
MAC LAN
Enables, disables the MAC LAN device.
Enabled
or Disabled
MAC Address
Displays the system MAC address.
Azalia Codec
Enables, disables the Azalia audio interface
Enabled
or Disabled
SATA0 Mode
Displays the available SATA0 modes.
IDE
, RAID, AHCI, Linux AHCI or
Disabled
SATA Hotplug
Enables, disables the SATA hotplug. When
enabled, the SATA controller is always on,
therefore consuming more power.
Enabled
or Disabled
SMU
Enables, disables the SMU (System
Management Unit) function
Enabled
or Disabled
Software Based PMU FW
Loading
Enables, disables firmware boot up from an
external flash drive containing SBIOS.
Enabled
or Disabled
Interrupt Mode
Selects the interrupt mode.
APIC
or PIC
PCI Express MSI
Enables, disables the PCI Express MSI
(Message Signaled Interrupt) function.
Enabled
or Disabled
Summary of Contents for 5520G
