19
Eng
lis
h
Image
Projection
Mode
•
Front: The factory default setting.
•
Rear: Reverses the image so you can project from
behind a translucent screen.
Projection
Location
•
Auto: Automatically adjusts projection location of
image.
•
Desktop
•
Ceiling: Turns the image upside down for ceiling-
mounted projection.
Aspect
Ratio
Use this function to choose your desired aspect ratio.
•
Auto: Keeps the image with original width-height ratio
and maximizes the image to fit native horizontal or
vertical pixels.
•
Full (for WXGA/1080p/WUXGA models): The image will
be displayed making full use of the horizontal and
vertical pixels.
•
4:3: The image will be scaled to fit the screen and
displayed using a 4:3 ratio.
•
16:9: The image will be scaled to fit the screen and
displayed using a 16:9 ratio.
•
L.Box (for WXGA/1080p/WUXGA models): Keeps the
original signal aspect ratio and zooms in by 1.333 times.
Auto Keystone
Automatically adjusts image distortion caused by tilting
projection (±40 degrees).
Manual
Keystone
Manually adjusts image distortion caused by tilting
projection (±40 degrees).
This function is unavailable when Auto Keystone is set
to "On".
Resolution
Sets the natvie resolution between 1080P and WUXGA for
the projector.
Digital Zoom
Out (Install)
Sets the default size of the projected image. You can further
zooms in or out the image by pressing
. Using the
functions of Digital Zoom Out (Install) and Image Shift
together helps you fit the projected image full screen
without adjusting the existing ceiling mount settings.