17
Eng
lis
h
IMAGE
Aspect Ratio
Use this function to choose your desired aspect ratio.
•
Auto: Keeps the image with original width-height ratio
and maximizes the image to fit native horizontal or
vertical pixels.
•
4:3: The image will be scaled to fit the screen and
displayed using a 4:3 ratio.
•
16:9: The image will be scaled to fit the screen and
displayed using a 16:9 ratio.
•
16:10: The image will be scaled to fit the screen and
displayed using a 16:10 ratio.
Image Position
•
Press
to move the image left.
•
Press
to move the image right.
•
Press
to move the image down.
•
Press
to move the image up.
Overscan
Adjustment
Conceals the poor picture quality in the four edges. The
greater the value, the more portion of the picture is
concealed while the screen remains filled and geometrically
accurate. Setting 0 means the picture is 100% displayed.
Phase
Adjusts the clock phase to reduce image distortion.
H.Size
Adjusts the horizontal width of the image.
Auto
Automatically determines the best picture timings for the
displayed image.
3D
Selects "On" to enable the 3D function supported by DLP 3D
technology.
•
On: Select this item while using DLP 3D glasses, quad
buffer (NVIDIA/ATI...) graphics card and HQFS format file
or DVD with corresponding SW player. When this
function is enabled, Picture Mode cannot be adjusted.
•
Off: Turns off the 3D mode.
3D Format
If the 3D content is not displayed correctly, you can select a
3D format that suits the 3D content you are viewing and
obtain the best result.
3D L/R Invert
If you see a discrete or overlapping image while wearing DLP
3D glasses, you may need to execute "ENTER" to get best
match of left/right image sequence to get the correct image
(for DLP 3D).
