Index
137
Cache scheme, 3-31
External cache, 3-30
Internal cache, 3-30
Memory at 15MB-16MB reserved for, 3-31
Memory parity mode, 3-31
Modem ring-in function, 2-15
N
Num lock after boot, 3-23
O
Onboard connector functiion, 2-7
Onboard device settings, 3-17
Floppy disk controller, 3-17
IDE controller, 3-17
Onboard audio chip, 3-18
Onboard Ethernet chip, 3-18
PS/2 mouse controller, 3-17
USB host controller, 3-17
USB legacy mode, 3-18
Onboard peripherals, 3-14
Onboard device settings, 3-17
Parallel port, 3-15
Serial port 1, 3-14
Operating the CD-ROM drive, A-5
Emergency eject, A-6
Starting the drive, A-5
P
Parallel port, 3-15
Base address, 3-15
ECP DMA channel, 3-16
IRQ, 3-15
Operation mode, 3-16
PnP/PCI options, 3-32
Graphics aperture size, 3-33
PCI IRQ setting, 3-32
PCI IRQ sharing, 3-33
PCI slots, 3-32
Plug and play OS, 3-34
Reset resource assignments, 3-34
VGA palette snoop, 3-33
Post-installation instructions, 4-3
Power management, 3-19
Power management mode, 3-19
Power switch < 4 sec., 3-20
Schedule resume from suspend, 3-20
System wake-up event, 3-20
Power management mode, 3-19
IDE hard disk standby timer, 3-19
Sleep mode, 3-20
System sleep timer, 3-20
Power switch < 4 sec., 3-20
Power-on password, 3-28
Operation mode, 3-28
Pre-installation instructions, 4-2
Precautions, A-2
During operation, A-2
When handling a disc, A-2
Preinstallation, 1-1
Selecting a site, 1-1
Unpacking components, 1-1
Primary display adapter, 3-22
Processor, 3-4
Processor speed, 3-4
Product information, 3-7
DMI BIOS version, 3-8
Main board ID, 3-8
Main board S/N, 3-8
Product name, 3-7
System BIOS version, 3-8
System S/N, 3-7
Product name, 3-7
R
Rear panel, 1-3
Reconfiguring the system, 4-15
Removing a DIMM, 4-15
Removing and replacing the housing cover, 4-4
Housing cover, removing, 4-4