Chapter 2
36
IDE Function Setup
All on
-
board peripherals can be set up through this menu.
Parameter
Description
Options
On-Chip IDE First/Second
Channel
The chipset contains a PCI IDE
interface with support for two IDE
channels. Select Enabled to
activate the first and/or second
IDE interface. Select Disabled to
deactivate an interface, if you
install a primary and/or secondary
add-in IDE interface.
Enabled
Disabled
IDE Primary/ Secondary Master/
Slave PIO
The four IDE PIO (Programmed
Input/Output) fields let you set a
PIO mode (0-4) for each of the
four IDE devices that the onboard
IDE interface supports. Modes 0
through 4 provide successively
increased performance. In Auto
mode, the system automatically
determines the best mode for
each device.
OnChip IDE Channel0
[Enabled]
Primary Master PIO
[Auto]
Primary Slave PIO
[Auto]
Primary Master UDMA
[Auto]
Primary Slave UDMA
[Auto]
OnChip IDE Channel1
[Enabled]
Secondary Master PIO
[Auto]
Secondary Slave PIO
[Auto]
Secondary Master UDMA
[Auto]
Secondary Slave UDMA
[Auto]
IDE DMA Transfer Access
[Enabled]
Serial-ATA 1
[Enabled]
Serial-ATA 2
[Enabled]
IDE Prefetch Mode
[Enabled]
IDE HDD Block Mode
[Enabled]
SATA PORT Speed Settings
[Auto]
F5:Previous Values F7:Optimized Defaults
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
Phoenix - Award BIOS CMOS Setup Utility
IDE Function Setup
Item Help
Menu Level
Summary of Contents for AcerPower APM6
