6
11. Turn on control. Make sure all the motors are running clockwise
(spindle motor, hydraulic motor, cross-feed motor, vertical rapid motor,
and coolant pump motor).
1) Release emergency button, turn on green start button. Turn chuck
control on.
2) Press spindle, hydraulic and magnetic separator and paper filter sys-
tem buttons to check rotation.
3) Check rapid vertical motor by pressing slow up. Take out head sup-
port and test and slow down push buttons. Test rapid up and rapid
down.
4) Check cross-feed motor by pressing in and out push button while
function switch is in manual mode.
If opposite direction, please turn off main power by pushing emergency
button. Switch any two power lines that go into the machine.
