Altos 1100E Series User’s Guide
4-2
Table 4-1
Default Settings for SCSI Controller and All Devices
Global Settings for SCSI Controller and All Devices
Default Value
Host Adapter SCSI ID
7
SCSI Parity Checking
Enabled
Host Adapter SCSI Termination
Automatic
Boot Channel/ Boot SCSI I/O
A/0 (zero)
Host Adapter BIOS
1
Enabled
Support Removable Disks Under BIOS as Fixed Disks
Boot only
Extended BIOS Translation for DOS Drives > 1 Gbyte
Enabled
2
Display <Ctrl-A> Message During BIOS Initialization
Enabled
BIOS Support for Bootable CD-ROM
Enabled
BIOS Support for Int13 Extensions
Enabled
Individual Settings for Each SCSI Device
Default Value
Initiate Wide Negotiation
Yes
Maximum Sync Transfer Rate
80 MBytes/sec.
Enable Disconnection
Yes
Send Start Unit Command
1
Yes
Initiate Wide Negotiation
Yes
1
Settings are valid only if host adapter BIOS is enabled.
2
Do not change this setting from the default.