Index
cxxiii
4.9.2 Power-on Password
The Power-on Password secures your system against unauthorized use. The
default setting is None. Once you set this password, you have to type it
whenever you boot the system. To set this password, enter the Setup Utility,
select System Security, and then highlight the Power-on Password parameter.
Follow the same procedure as in setting the Setup password.
Make sure to set JP4 to 1-2 to enable the
Power-on password.
Power-on Password
Enter your new Power-on Password twice. Power-on
Password may be up to 7 characters long.
Enter Password ................. [ ]
Enter Password again ........... [ ]
Set or Change Password
Operation Mode
This function lets you enable or disable the password prompt display. When set
to Normal, the password prompt appears before system boot. When set to
Keyboard Lock
, the password prompt does not appear; however, your system
will not respond to any keyboard or mouse input until you enter the correct
password. The default setting is Normal.
Summary of Contents for Altos 12000 Series
