103
HDD activity indicator does not light.
Do the following:
•
Make sure the data and power cables are connected correctly.
•
Check that relevant switches and jumpers on the hard drive and on
the backplane board (for hot-plugs HDD) are set correctly.
DVD drive activity indicator does not light.
Do the following:
•
Make sure the IDE and power cables are properly connected.
•
Check that relevant switches and jumpers on the drive are set
correctly.
•
Check that the drive is properly configured.
DVD tray cannot be ejected.
Insert the tip of a paperclip into the small hole on the DVD drive.
Slowly pull the tray out from the drive until the tray is fully extended.
DVD drive cannot read a disc.
Do the following:
•
Make sure you are using the correct type of disc.
•
Make sure the disc is properly seated in the drive.
•
Make sure the disc is unscratch and free of any contaminant.
•
Make sure the drive’s IDE and power cables are properly
connected.
Newly installed memory modules are not detected.
Do the following:
•
Make sure the memory modules specifications comply with the
system requirements.
•
Make sure the memory modules have been populated according
to the system guidelines.
•
Make sure the memory modules are properly installed on their
mainboard slots.
Summary of Contents for Altos G5450 Series
