113
Starting LSI MegaRAID SAS RAID Configuration Utility
To start LSI MegaRAID SAS RAID Configuration Utility for MegaRAID
SAS 8204ELP, press
CTRL-M
when you see the RAID BIOS during POST.
After POST finished, the Adapter Selection page will show on the
screen. Please click on
Start
to launch the configuration menu.
Loading Factory default setting
1
Select
Objects
from
Management menu
.
2
Select
Adapter
from
Objects
. The selectable adapter will be
listed.
3
Press
Enter
on the adapter and the adapter setting will be shown
on the screen. You can change the setting from this menu.
4
Select
Factory Default
and
Yes
to load the default settings.
5
Exit the configuration utility and press
<Ctrl> + <Alt> + <Del>
to
reboot the server.
Creating a RAID volume
1
Select
Configuration
from
Management Menu
.
2
Select
New Configuration
from the
Configuration menu
. An
array selection window displays the devices connected to the
current controller.
3
Press the arrow keys to choose specific physical drives and press
spacebar to associate the selected drive with the current array. The
indicator for selected drive change from
READY
to
ONLINE
.
4
After you adding the drives to current array, press
Enter
to finish
creating current array.
5
Press
Enter
again to select array to configure.
6
Press
spacebar
to select the array and press
F10
to configure the
logical drive
7
Select
Accept
and press
Enter
to use the default setting for the
RAID volume.
8
Press
Enter
to end the array configuration.
9
Select
YES to Save Configuration
and press any key to return to
the
Configuration menu
.
10 Press
ESC
to return to the
Management Menu
.
Summary of Contents for Altos G5450 Series
