111
Note:
You have to install at least one SATA HDD to the onboard
SATA controller in the system or you cannot see the MediaShield
ROM BIOS 6.77 during POST.
Creating a RAID1 Volume
1
After you entering the configuration utility, Use the
Up
and
Down
arrow key to change the
RAID Mode
to
Mirroring
.
2
Use the
Left
and
Right
arrow key to move the HDD from
Free
Disks
to
Array Disks
.
3
Press
F7
to finish the RAID creation.
4
Press
Y
to clear the data on disks.
5
Now you will see the RAID volume listed on screen. You can press
Ctrl-X
to exit and start to install OS
Configuring LSI MegaRAID SAS 8708ELP
This section briefly shows how to create RAID with LSI MegaRAID SAS
8708ELP.
Starting LSI MegaRAID SAS RAID Configuration Utility
To start LSI MegaRAID SAS RAID Configuration Utility for MegaRAID
SAS 8708ELP, press
CTRL-H
when you see the RAID BIOS during POST.
After POST finished, the Adapter Selection page will show on the
screen. Please click on
Start
to launch the configuration menu.
Loading Factory Default Setting
1
In the Configuration menu, select
Adapter Properties
. The
current adapter settings appear. Please click on
Next
to change
the setting.
2
Change the setting of
Set Factory Defaults
from
No
to
Yes
then
click on submit.
3
Press
Ctrl+Alt+Del
to reboot the server.
Summary of Contents for Altos G5450 Series
