2 System setup
34
Turning off the system
There are two ways by which you can turn off the server. These include:
•
To turn off the system from Windows
To turn off the server, on the Windows taskbar click on the
Start
button, point to
Shut Down...
, select
Shut down
from the
drop-down window then click on
OK
. You can then turn off all
peripherals connected to your server.
If you cannot shut down the server, press the power button for at
least four seconds. Quickly pressing the button may put the server
in a Suspend mode only.
•
To turn off the system from the ePanel LCD display
Important:
The system cannot be turned off from the ePanel LCD
display when it is running in Safe Mode.
Note:
You must install related ePanel software before you can use
ePanel. For more information refer to “Appendix D: ePanel” on
page 163.
ePanel runs only on Microsoft Windows 2000 and Windows Server
2003 platform.
(1) Use the Navigation key to select Setting on the configuration
menus screen, then press the Navigation key.
Summary of Contents for Altos G710
