Altos R910 Installation Configuration Guide
12
CIM Browser Installation
1.
Please insert the EasyBUILD 7.1 build 100 into the optical drive.
2.
Select Utilities, expand Utilities -> Altos R910 -> LSI Logic 53C1030 U320
SCSI, select CIM Browser (Windows Server 2003 x64) and click on Setup.
3.
Follow the instructions to complete the CIM Browser installation.
Broadcom Advanced Control Suite Utility Installation
The Broadcom Advanced Control Suite Utility installation is the same as
integrated SCSI hardware RAID enabled. Please refer to the Windows Server
2003 Enterprise x64 Edition (with Integrated SCSI Hardware RAID) Broadcom
Advanced Control Suite Installation section.
Windows Server 2003 Enterprise x64 Edition SP1 (with
Integrated SAS Hardware RAID)
Below information describes how to manually install Windows Server 2003
Enterprise x64 Edition on Altos R910 with integrated SAS hardware RAID.
Drivers Required
For Windows Server 2003 x64 Installation, the following device drivers are
required.
Device
Version
Directory on EasyBUILD
Onboard ATI
Radeon 7000 VGA
6.14.10.6553 \Disk\R910\onboard\VGA
Onboard Intel
E8501 Chipset
5.2.3790.1380 Built-in
Integrated SAS
hardware RAID
1.17.0.64 \Disk\r910\raid\Integrated_SAS\ws2k3x
64\
Onboard LSI 1030
SCSI controller
5.2.3790.1380 Built-in
Onboard Broadcom
BCM5704 Gigabit
Ethernet
8.48.0.0 \Disk\r910\nic\bcm\WS2003X64\
Onboard USB 2.0
5.2.3790.1380
Built-in
SAS Hot-swap
backplane
5.0.6055.2 \Disk\r910\onboard\hsbp\sas\
Software Required
The management utility for integrated SAS hardware RAID and NIC can be
found in the EasyBUILD 7.1 build 300 (or later).
Software
Version
Directory on EasyBUILD
Intel RAID Web
Console 2
1.13-07 \app\r910\Integrated_SAS\Windows\
Broadcom 7.7.7
\app\r910\NIC\BACS\WS3XPx64\
