1
Introduction :
The Universal Serial Bus (USB) is designed to replace the
current serial, parallel, and other ports on a PC with a single
universal interface. This USB Serial Converter provides an
easy way to connect USB ports to legacy RS232 interface
peripherals. The ALU-131 supports serial transmission at all
common legacy device. It also has the ability to enroll as a PC
COM port.
Products Features :
•Compatible IBM PC with Pentium
TM
processor and USB
connectivity.
•Complete RS-232 modem control signals.
•Provide RS-232 serial port (DB-9M).
•No IRQ , I/O address or DMA's required.
•Transmission Speed up to 56Kbps.
•Supports either Self-powered or Bus-powered mode.
•Supports Windows 98
®
Hardware Requirement :
•IBM 486 compatible processor or higher
•Equipped with USB port
Operating Systems Requirement :
•Microsoft Windows 98
®
New Installation:
Step 1 : To turn on your PC
Step 2 : Plugging its A-Type connect into your PC USB port
Step 3 : The Windows 98 will guide you through to install
the unit, just follows the figures below :
