17
RAID configuration utilities
Adaptec Onboard SATA RAID Creation
Configuring Adaptec onboard SATA RAID
This section briefly shows how to create RAID volume with Adaptec
onboard SATA RAID.
Enabling onboard SATA RAID
1
Turn on the server and the display monitor. If the server is already
turned on, please close all open applications and then restart the
server.
2
During POST, press <F2> to access the BIOS Setup Utility.
3
Select the Advanced > ATA Controller Configuration submenu.
4
Change the setting of the OnChip SATA Type field from Native IDE
to RAID.
5
Press <F10> and select Ok to save the setting and close the Setup
Utility.
Entering onboard SATA RAID BIOS Utility
To start Adaptec onboard SATA RAID BIOS Utility, press CTRL-A when
you see the RAID BIOS prompt during POST. After POST finished, the
Adaptec RAID Configuration Utility will display on the screen.
Loading Factory Default Setting
Adaptec onboard SATA RAID utility does not provide an option for
factory default setting. To reset onboard SATA RAID volume related
configurations, please delete the existing onboard SATA RAID
volumes.
Summary of Contents for AR585 F1
