54
Chapter 3
Disassemble the Middle Cover Board
1.
Remove the one screw.
2.
Detach the middle cover from the unit with the flat screw driver.
3.
Disconnect the system cable from the middle cover board.
4.
Remove the two screws to release the middle cover board.
5.
Then detach the middle cover board from cover.
Disassemble the Keyboard
1.
Remove the screws on each side.
2.
Pull up both sides of the latches to disconnect the FFC from the mainboard.
3.
Remove the screws on each side to release the keyboard bracket.
4.
Then take the keyboard supporter bracket from the system.