background image

Chapter 2

25

Processor

 

The Processor parameter specifies the type of processor currently installed in
your system. The system supports Pentium II or Celeron processors.

Processor Speed

 

The Processor Speed parameter specifies the speed of the processor currently
installed in your system.

Internal Cache

 

This parameter specifies the first-level or the internal memory (i.e., the memory
integrated into the CPU) size, and whether it is enabled or disabled.

External Cache

 

This parameter specifies the second-level cache memory size currently
supported by the system.

Floppy Drive A

 

This parameter specifies the system’s current floppy drive A settings.

Floppy Drive B

 

This parameter specifies the system’s current floppy drive B settings

IDE Primary Channel Master

 

This parameter specifies the current configuration of the IDE device connected
to the master port of the primary IDE channel.

IDE Primary Channel Slave

 

This parameter specifies the current configuration of the IDE device connected
to the slave port of the primary IDE channel.

IDE Secondary Channel Master

 

This parameter specifies the current configuration of the IDE device connected
to the master port of the secondary IDE channel.

IDE Secondary Channel Slave

 

This parameter specifies the current configuration of the IDE device connected
to the slave port of the secondary IDE channel.

Summary of Contents for Aspire 3300













































































































Reviews: