40
System Utilities
System Security
The Setup program has a number of security features to prevent unauthorized
access to the system and its data.
The following screen appears if you select System Security from the main menu:
System Security
Page 1/1
Setup Password ............. [ None ]
Power-on Password........... [ None ]
Operation Mode ............ [ Normal ]
*Disk Drive Control
*Floppy Drive ............. [ Normal ]
*Hard Disk Drive........... [ Normal ]
↑↓
= Move Highlight Bar
F1 = Help
Esc = Exit
→
←
= Change Setting,
NOTE *: Can only be seen when press
V
.
Setup Password
The Setup Password prevents unauthorized access to the BIOS utility.
Setting a Password
1. Make sure that switch 5 of SW1 is set to
On
(bypass password).
IMPORTANT You cannot enter the BIOS utility if a Setup password does not
exist and switch 5 of SW1 is set to
Off
(password check
enabled).
By default, switch 5 of SW1 is set to
On
(bypass password).
2. Enter the BIOS utility and select System Security.
Summary of Contents for Aspire 3300
