manualshive.com logo in svg

Acer Aspire 5230, Service Manual

The Acer Aspire 5230 is a versatile laptop that offers reliable performance. To assist users, a comprehensive service manual is available for download, absolutely free, from 88.208.23.73:8080. This manual provides detailed instructions and troubleshooting tips to ensure a smooth experience with this exceptional laptop.

Share
Download
background image

VIII

Table of Contents

Removing the Hard Disk Drive Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Removing the Optical Drive Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Main Unit Disassembly Process  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Main Unit Disassembly Flowchart  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Removing the Switch Cover  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Removing the Keyboard  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Removing the Antenna  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Removing the LCD Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Removing the Upper Cover   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Removing the Finger Print Reader  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Removing the Upper Right Saddle  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Removing the Left Speaker Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Removing the Upper Left Saddle   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Removing the Touch Pad Bracket   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Removing the Launch Board   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Replacing the Media Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Removing the eKey Board   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
 Removing the Switch Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Removing the Right Speaker Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Removing the TV Board  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Removing the Bluetooth Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Removing the USB Board  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Removing the Modem Module   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Removing the Subwoofer Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Removing the Main Board   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Removing the RJ-11 Port  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93
Removing the Thermal Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
Removing the CPU  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Removing the VGA Module   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97

 LCD Module Disassembly Process  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

LCD Module Disassembly Flowchart   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Removing the LCD Bezel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Removing the Inverter Board   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Removing the Camera Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Removing the LCD Panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Removing the LCD Brackets and FPC Cable  . . . . . . . . . . . . . . . . . . . . . . . . . .105
Removing the Antennas  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
Removing the MIC Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

LCD Module Reassembly Procedure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Replacing the LCD Panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Replacing the LCD Bezel   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

Main Module Reassembly Procedure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

Replacing the VGA Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Replacing the CPU  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Replacing the Thermal Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Replacing the RJ-11 Port   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Replacing the Mainboard   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
Replacing Subwoofer Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Replacing the Modem Module   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Replacing the Bluetooth Board  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Replacing the TV Board   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Replacing the Right Speaker Module  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
Replacing the Switch Board   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
Replacing the eKey Board   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
Replacing the Media Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

Summary of Contents for Aspire 5230















































































































































































































Reviews:

No comments

Related manuals for Aspire 5230

Acer Aspire E1-522 Quick Manual preview
Aspire E1-522
Brand: Acer Pages: 9
IBM Thinkpad X30 Series Service And Troubleshooting Manual preview
Thinkpad X30 Series
Brand: IBM Pages: 100
BenQ Joybook Lite U101 Series User Manual preview
Joybook Lite U101 Series
Brand: BenQ Pages: 67
MAXDATA PRO 6000 I User Manual preview
PRO 6000 I
Brand: MAXDATA Pages: 44
Itronix GoBook PRO II User Manual preview
GoBook PRO II
Brand: Itronix Pages: 101
Medion AKOYA E6221 User Manual preview
AKOYA E6221
Brand: Medion Pages: 100
Asus CHROMEBOOK C204EE E-Manual preview
CHROMEBOOK C204EE
Brand: Asus Pages: 94
Asus A8Dc - A1 Hardware User Manual preview
A8Dc - A1
Brand: Asus Pages: 71
NEC VERSA DAYLITE 3-CELL REMOVABLE BATTERY Manual preview
VERSA DAYLITE 3-CELL REMOVABLE BATTERY
Brand: NEC Pages: 6
NEC USB PORTBAR Manual preview
USB PORTBAR
Brand: NEC Pages: 6
Toshiba L675D-S7100 Specifications preview
L675D-S7100
Brand: Toshiba Pages: 4
Toshiba L675D-S7050 Specifications preview
L675D-S7050
Brand: Toshiba Pages: 4
Toshiba L675D-S7040 Specifications preview
L675D-S7040
Brand: Toshiba Pages: 4
Toshiba L675D-S7042 Specifications preview
L675D-S7042
Brand: Toshiba Pages: 4
Toshiba L675D-S7046 Specifications preview
L675D-S7046
Brand: Toshiba Pages: 4
Toshiba L675D-S7013 Specifications preview
L675D-S7013
Brand: Toshiba Pages: 4
Toshiba L675D-S7015 Specifications preview
L675D-S7015
Brand: Toshiba Pages: 4
Toshiba L675D-S7022 Specifications preview
L675D-S7022
Brand: Toshiba Pages: 4

Brands by name

Popular brands

Load more brands