Chapter 2
33
DOS Flash Utility
Perform the following steps to use the DOS Flash Utility:
1.
Press F2 during boot to enter the Setup Menu.
2.
Select
Boot Menu
to modify the boot priority order, for example, if using USB HDD to Update BIOS, move
USB HDD to position 1.
3.
Execute the
KAW6xxx.BAT
batch file to update BIOS.
The flash process begins as shown.
Information Main Advanced
Security
Power
Boot
Exit
Boot priority order:
1. IDE0 : WDC WD1600BEVT-22ZCT0-(S1)
Use <
↑
> or <
↓
> to
2. IDE1 : HL-DT-STDVDRAM GT10N-(S3)
select a device, then
3. Network Boot : Realtek Boot Agent
press <F6> to move it
4. USB HDD : ABC
up the list, or <F5>
5. USB FDD :
to move it down the
6. USB KEY :
list. Press <Esc> to
7. USB CD/DVD ROM :
escape the menu.
F1
Help
↑↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←→
Select Menu
Enter
Select
X
Sub-Menu
F10
Save and Exit
PhoenixBIOS Setup Utility
Item Specific Help
Summary of Contents for Aspire 5515
