Chapter 2
39
Using DMITools
The DMI (Desktop Management Interface) Tool copies BIOS information to eeprom to be used in the DMI pool
for hardware management.
When the BIOS displays
Verifying DMI pool data
it is checking the table correlates with the hardware before
sending to the operating system (Windows, etc.).
To update the DMI Pool, perform the following steps:
1.
Boot into DOS.
2.
Execute
dmitools
. The following messages report to screen to confirm completion:
•
dmitools /r ==> Read dmi string from bios
•
dmitools /wm xxxx ==> Write manufacturer name to eeprom
•
dmitools /wp xxxx ==> Write product name to eeprom
•
dmitools /ws xxxx ==> Write serial number to eeprom
•
dmitools /wu xxxx ==> Write uuid to eeprom
•
dmitools /wa xxxx ==> Write asset tag to eeprom
Using the ICW50/ICY70 LAN MAC Utility
1.
Boot into DOS.
2.
Execute
go.bat
Summary of Contents for Aspire 5515
