Aspire AX1430 Service Guide
83
Jumper Setting
This section explains how to set the jumper for correct configuration of the main board.
Jumpers with more than one pin are numbered. When setting a jumper, ensure that the jumper caps are
placed on the correct pins.
The following illustration shows the location of CLR_CMOS.
The following table shows the settings of the 3-pin CLR_CMOS jumper. Place the jumper cap on pins 1 and 2
to close or short the jumper. Place the jumper cap on pins 2 and 3 to open or clear the jumper.
Jumper
Type
Description
Setting (default)
CLR_CMOS
3-pin
Clear CMOS
1-2: Close (default)
2-3: Open
Before clearing the CMOS,
make sure to turn off the
system.
Summary of Contents for Aspire AX1430
