2
Chapter 1
•
Speed support: 1333MHz
•
Capacity support:
•
DDR III un-buffered non-ECC DIMM support.
•
1GB to 16GB max. Memory support.
•
Design Criteria:
•
Should meet AMD chipset platform design guide.
•
Dual channel should be enabled always when plug-in 2 same memory size DDR III memory
module.
•
Should meet AMD chipsets family BIOS specification.
Hard disk drive
•
Support up to two SATA ports
•
3.5"
•
Capacity and models are listed on AVLC
Optical disk drive
•
Support one SATA 5.25" standard ODD
•
Support DVD-ROM, DVD-SuperMulti, BD-combo, BD-rewrite
•
Maximum ODD depth to 185mm with bezel
•
Models are listed on AVLC
Graphics card
•
No mechanical retriction to support for double slot, full length graphics cards in the single PCIe X16 slot
Vedio
•
AMD RS880P on die graphic solution
•
Meet Microsoft Vista Premium graphic requirement
•
1 HDMI port and 1 D-sub port for Consumer model
•
1 D-sub port and 1 DVI-D port for Commercial model
•
Need to measure VGA follow Acer SOP
Audio
•
Chip : HD audio codec ALC662-VC HD codec 5.1
•
Connectors support:
•
Rear 3 jack follow HD audio definition (ALC662-VC)
•
Audio jacks color coding: should meet Microsoft Windows Logo Program Device Requirements:
Audio-0002
•
1 S/PDIF-out header (1*4)
•
1 front panel audio header (2*5)
•
1 internal speaker header (2*4)
•
Add HD de-pop CKT
Serial ATA controller
•
Slot Type: SATA connector
•
SATA ports quantity: 6
•
Transfer rate support: 1.5Gb/s and 3Gb/s
Summary of Contents for Aspire M3410
