Chapter 2
20
Power
Parameter
Description
Option
ACPI Suspend Mode
Select an ACPI state.
S3 (STR)
S1 (POS)
Deep Power Off Mode
Select the Deep power off Mode
Enabled
Disabled
Power On by RTC Alarm
Enables or Disables to wake up the system by RTC Alarm Function
Enabled
Disabled
Power On by PCIE Devices
This system can be turned off with a software commend. If you enable
this item, the system can automatically resume if there is an incoming
call on the PCIE LAN card.You must use an ATX power supply in order
to use this feature.Use this item to dowake-up action if inserting the
PCIE card.
Enabled
Disabled
Power On by PCI Devices
This system can be turned off with a software commend. If you enable
this item,the system can automatically resume if there is an incoming
call on the PCI LAN card.You must use an ATX power supply in order to
use this feature. Use this item to dowake-up action if inserting the PCI
card.
Enabled
Disabled
Wake Up by PS/2 KB/
Mouse
Enables or disables to wake up the system from a power saving mode
using a PS2 keyboard or mouse.
Enabled
Disabled
Wake Up by USB KB/
Mouse
If enabled, press any key or click the mouse will wake system from S1/
S3 state.
Enabled
Disabled
Restore On AC Power Loss
Enables or disables the system to reboot after a power failure or
interrupt occurs.
On
Off
Last State
Summary of Contents for Aspire M3450
