Recovery - 35
3. Plug in the USB disk or insert a blank disc into the drive indicated in the
Backup to
list, then click
Next
. You will be shown the backup progress
on the screen.
4. Follow the process until it completes:
• If you are using optical discs, the drive ejects each disc as it
completes burning it. Remove the disc from the drive and mark it
with a permanent marker.
If multiple discs are required, insert a new disc when prompted, then
click
OK
. Continue until the process is complete.
• If you are using a USB disk, unplug the USB drive and mark it with a
permanent marker.
Important: Write a unique, descriptive label on each backup,
such as ‘Windows Recovery Backup’ or ‘Apps/Drivers Recovery
