background image

Frequently asked questions -  67

The keyboard does not respond.

Try attaching an external keyboard to a USB port on the

 

computer.  If  it     

works, contact your dealer or an authorized service center as the internal 
keyboard cable may be loose.

The printer does not work.

Check the following:

• Make sure that the printer is connected to a power outlet and that it is 

turned on.

• Make sure that the printer cable is connected securely to a USB port 

and the corresponding port on the printer.

I want to restore my computer to its original settings without recovery 
CDs.

Note:

 If your system is the multilingual version, the operating system 

and language you choose when you first turn on the system will be the 
only option for future recovery operations.

This recovery process helps you restore the C: drive with the original 
software content that is installed when you purchased

 

your computer. 

Follow the steps below to rebuild your C: drive.

 

(Your C: drive will be 

reformatted and all data will be erased.) It is important to back up all data 
files before using this option.

Before performing a restore operation, please check the BIOS settings.

1. Check to see if 

Acer disk-to-disk recovery

 is enabled or not.

2. Make sure the 

D2D Recovery

 setting in 

Main

 is 

Enabled

.

Summary of Contents for Aspire S3-951















































































Reviews: