32
Chapter 2
Integrated Peripherals
Parameter
Description
Option
OnBoard Floppy Controller
Use this item to enable or disable the
onboard floppy disk drive interface.
Enabled
Disabled
Serial Port1/2 Address
Use this item to enable or disable the
onboard COM1serial port, and to assign a
port address.
3F8/IRQ4
2E8/IRQ3
3E8/IRQ4
Parallel Port Address
This item enable or disable the onboard
LPT1 parallel port, and assigns a port
address, The Auto setting will detect and
available address.
378
278
3BC
Parallel Port Mode
Use this item to set the paralll port mode .
Normal
ECP
EPP
ECP+EPP
ECP Mode DMA Channel
When the onboard parallel port is set to
ECP mode, the parallel port can use DMA3,
DMA0, or DMA1
DMA0
DMA1
DMA3
Parallel Port IRQ
Use this item to assign IRQ to the parallel
port
IRQ5/
IRQ7
Audio Device
This item enables or disabled the onboard
AC’97 audio chip
Disabled
Enabled
Modem Device
Use this item to enable or disable the
modem device
Disabled
Enabled
Onboard Lan Device
Enables and disables the onboard LAN
device
Disabled
Enabled
Onboard Lan Boot ROM
Use this item to enable or disable the
booting from the onboard LAN or a network
add-in card with a remote boot ROM
installed.
Disabled
Enabled
CMOS Setup Utility- Copyright (C) 1985-2006, American Megatrends, Inc.
Integrated Peripherals
Serial Port2 Address 2F8/IRQ3
ECP Mode DMA Channel DMA3
Parallel Port IRQ IRQ7
F6:Load Optimized Defaults F7:Load Fail-Safe Defaults
Onboard LAN Boot Rom Disabled
Audio Device Enabled
Modem Device AUTO
Onboard Lan Device Enabled
KLIJ
:Move Enter: Select +/-/ :Value ESC:Exit F1:General Help
USB Keyboard/Mouse Support Enabled
Onboard USB Controller Enabled
Help Item
OnBoard Floopy Controller Enabled
Serial Port1 Address 3F8/IRQ4
Parallel Port Mode ECP
Summary of Contents for Aspire T136
Page 110: ...Chapter 6 104 ...