background image

English

3

Important safety instructions

Read these instructions carefully. Please put them somewhere safe for 

future reference.

1  Follow all warnings and instructions marked on the product.

2  Unplug this product from the wall outlet before cleaning. Do 

not use liquid cleaners or aerosol cleaners. Use a damp cloth for 

cleaning.

3  Do not use this product near water.

4  Do not place this product on an unstable cart, stand or table. The 

product may fall, sustaining serious damage.

5  Slots and openings are provided for ventilation; to ensure reliable 

operation of the product and to protect it from overheating, 

these openings must not be blocked or covered. The openings 

should never be blocked by placing the product on a bed, sofa, 

rug or other similar surface. This product should never be placed 

near or over a radiator or heat register or in a built-in installation 

unless proper ventilation is provided.

6  This product should be operated from the type of power 

indicated on the marking label. If you are not sure of the type of 

power available, consult your dealer or local power company.

7  Do not allow anything to rest on the power cord. Do not locate 

this product where the cord will be stepped on.

8  If an extension cord is used with this product, make sure that the 

total ampere rating of the equipment plugged into the extension 

cord does not exceed the extension cord ampere rating. Also, 

make sure that the total rating of all products plugged into the 

wall outlet does not exceed the fuse rating.

9  Never push objects of any kind into this product through cabinet 

slots as they may touch dangerous voltage points or short-out 

parts, which could result in a fire or electric shock. Never spill 

liquid of any kind on the product.

10  Do not attempt to service this product yourself, as opening or 

removing covers may expose you to dangerous voltage points or 

other risks. Refer all servicing to qualified service personnel.

11  Unplug this product from the wall outlet and refer servicing to 

qualified service personnel under the following conditions:

a.  When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the product.

c.  If the product has been exposed to rain or water.

d. If the product does not operate normally when the operating 

instructions are followed. Adjust only those controls that are 

covered by the operating instructions.Improper adjustment 

of other controls could result in damage; extensive work by 

a qualified technician might then be required to restore the 

product to normal condition.

e.  If the product has been dropped or the case has been 

damaged.

f.  If the product exhibits a distinct change in performance, 

indicating a need for service.

12  Use only the proper type of power supply cord set (provided in 

your accessories box) for this unit. Always disconnect the power 

cord from the wall outlet before servicing or disassembling this 

equipment.

13. Do not overload an electrical AC outlet, power strip, or 

convenience receptical. The overall system load must not exceed 

80% of the branch circuit rating. If power strips are used, the load 

should not exceed 80% of the power strip input rating. 

14  Some products are equipped with a three-wire electrical 

grounding-type plug that has a third pin for grounding. This plug 

only fits into a grounded electrical outlet. This is a safety feature. 

Make sure the AC outlet is properly grounded. Do not defeat the 

safety purpose of the grounding-type plug by trying to insert it 

into a non-grounded outlet. If you cannot insert the plug into the 

outlet, contact your electrician to replace the obsolete outlet.

15  Do not use this LCD TV in the workplace, and maintain ample 

distance from it when watching. Watching a big-screen TV too 

close can cause eyestrain.

Disposal instructions

Do not throw this electronic device into the rubbish bin / container 
when discarding. To minimize pollution and ensure utmost protection 
of the global environment, please recycle.

For more information regarding WEEE, please refer to  
http://global.acer.com/about/environmental.htm

Declaration of Conformity

We, 

Acer Computer (Shanghai) Limited

3F, No. 168 Xizang medium road, Huangpu District, Shanghai, China

Contact Person: Mr. Easy Lai
Tel: 886-2-8691-3089 Fax: 886-2-8691-3120
E-mail: easy_lai@acer.com.tw

Hereby declare that:

Product:  

32” LCD TV Monitor

Trade Name:  

Acer

Model Number:  AT4250B-ATV

SKU Number: 

AT4250xxxxxx

 

 

(“x” = 0~9, a ~ z, or A ~ Z)

Is compliant with the essential requirements and other relevant provi-
sions of the following EC directives, and that all the necessary steps 
have been taken and are in force to assure that production units of 
the same product will continue comply with the requirements.

EMC Directive 2004/108/EC as attested by conformity 

with the following harmonized standards:

-. EN55022:1998 + A1:2000 + A2:2003, AS/NZS CISPR22:2002, Class B
-. EN55024:1998 + A1:2001 + A2:2003
-. EN55013:2001 + A1:2003
-. EN55020:2002 + A1:2003
-. EN61000-3-2:2000 +A2:2005, Class D
-. EN61000-3-3:1995 + A1:2001 

Low Voltage Directive 2006/95/EC as attested by con-

formity with the following harmonized standard: 

-. EN60065:2002

RoHS Directive 2002/95/EC on the Restriction of the 

Use of certain Hazardous Substances in Electrical and 

Electronic Equipment

 

 

 

 

 

 

 

 

               

June 15, 2007

Easy Lai / Director   

 

                     Date

Acer Computer (Shanghai) Limited

The grounding pin is an important safety feature. It is possible 
to receive an electric shock from a system that is not properly 
grounded

The grounding pin is also providing good immunity ability against 
unexpected noise that interferes performance of this product and is 
produced by other nearby electrical devices.

Compliant with Russian 
regulatory certification

Summary of Contents for AT4250B series





















Reviews: