1-18
Disassembly Procedures
Mainboard Removal
0
Prerequisite:
WLAN (Wireless Local Area Network) Module Removal
1. Find the mainboard (B) on the top assembly. Refer to
.
2. Disconnect the speaker cable from the mainboard connector (A) (
3. Disconnect the touchpad FFC from the mainboard connector (C) (
4. Disconnect the keyboard FPC from the mainboard connector (D) (
5. Disconnect the LED Board FFC from the mainboard connector (E) (
6. Remove three (3) screws (F & G) securing the mainboard in place (
).
Figure 1-21. Mainboard Connector & Screw Location
A
C
D
E
F
G