1-18
Disassembly Procedures
USB Board Removal
0
Prerequisite:
LCD Module Removal
1. Find the USB board (C) on the top assembly. Refer to
Figure 1-8
.
2. Disconnect the 30-pin USB board FPC (B) from the mainboard connector (D) and the
USB board connector (A) and remove the 30-pin USB board FPC (
Figure 1-21
).
3. Disconnect the 40-pin USB board FPC (F) from the mainboard connector (G) and the
USB board connector (E) and remove the 40-pin USB board FPC (
Figure 1-21
).
4. Remove one (1) screw (H) securing the USB board in place (
Figure 1-21
).
Figure 1-21. USB Board Removal
5. Remove the USB board from the top assembly (
Figure 1-22
).
Figure 1-22. USB Board Removal
H
C
D
G
B
A
E
F
WEEE Annex VII Component:
USB board
All manuals and user guides at all-guides.com
