EN-52
Setup Menu
This feature allows you to set up the default settings by preference for using your
camera.
1. Rotate the mode dial to
SET-UP
and turn your camera on.
2. Press the
MENU
button, then use
W
or
X
to select the [Set-up1] / [Set-up2] /
[Set-up3] menu.
3. Use
S
or
T
to select the desired option item, then press the
button.
4. To exit from the setup menu, rotate the mode dial to other desired mode
again.
Item
Functional Description
Format
Erases all images and reformats the SD card loaded in your
camera. Protected images are also erased. SD card cannot
be formatted if it is write-protected.
Refer to the section in this manual titled “Formatting an SD
Memory Card or Internal Memory” for further details.
* Yes / No
Beeper
This sets whether or not to mute the startup sound, and the
camera sound each time you press a camera button.
* Louder / Soft / Off
Date & Time
This sets the date and the time.
Refer to the section in this manual titled “Setting the Date and
Time” for further details.
Language
Sets the language that is displayed on the LCD monitor.
Refer to the section in this manual titled “Choosing the Screen
Language” for further details.
* English / Français / Deutsch / Español / Italiano /
/
Set :
TV
LCD Brightness
NTSC
NTSC
PAL
USB Mode
PC
Auto Shut Down
Set-up1
Set-up3
Set-up2
3 Min.
1 / 4
Set-up1
Set :
Date & Time
Language
y/m/d
Louder
English
Y/M/D
Set-up3
Set-up2
Format
Beeper
1 / 4
Set :
1 / 3
Reset Number
1
Set To Default
V.
Version
Set-up1
Set-up3
Set-up2
[Set-up1] settings
Y/M/D
