iii
Special notes on your digital photo
frame (DPF)
The following conditions are normal for the LCD screen and do not indicate a
problem.
•
Due to the nature of the fluorescent light, the screen may flicker during
initial use. Turn off the power and then turn it on again to make sure the
flicker disappears.
•
You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
•
The LCD screen has 99.99% or more effective pixels. It may include
blemishes of 0.01% or less, such as a missing pixel or a pixel lit all the time.
•
Due to the nature of the LCD screen, an afterimage of the previous screen
may remain after switching an image that has been displayed for hours. In
this case, the screen slowly recovers when the image is changed or after
the power has been switched off for a few hours.
Important information
Safety instructions
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Cleaning your product
Please follow these guidelines when cleaning this product:
•
Always unplug the digital photo frame before cleaning.
•
Use a soft cloth to wipe the screen and the casing.
CAUTION for accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment as possible. When you need to disconnect
the power, unplug the power cord from the electrical outlet.
CAUTION when unplugging
Unplug the power cord before removing the power supply unit from the device.