71
Eng
lis
h
10
Connect the necessary cables to the expansion card as required.
11
Observe the post-installation instructions described on page 57.
When you turn on the system, the BIOS setup automatically detects and
assigns resources to the new device (applicable only to Plug-and-Play
expansion cards).
To install a second CrossFire graphic card:
Note: Make sure the second graphic card supports CrossFire technology and
are of the same brand and GPU (graphics processing unit) specifications.
1
Perform the preinstallation instructions described on page 56.
2
If necessary, remove any cables that prevent access to the processor sockets.
3
Locate an empty expansion slot that is compatible with the specification of the card
you intend to install.
4
Press the release latch of the slot cover opposite the selected expansion slot.
5
Pull out the slot cover and store it for reassembly later.
Caution: Do not discard the slot cover. If the expansion card is removed in
the future, the slot cover must be reinstalled to maintain proper system
cooling.
6
Remove the expansion card from its protective packaging, handling it by the edges.
7
Insert the card into the selected slot.
When installing the card, ensure that the gold "fingers" on the card line
up with the slot on your motherboard.
While lining up your gold "fingers" with the PCI Express slot, also make
sure that you line up the back plate (the part of the graphics card that your
monitor plugs into) in between the edge of the motherboard and the back
of the case. This back plate will go where the tabs used to be.
8
Press the release latch to secure the card in place.
Summary of Contents for GT7700-UQ9300A
