background image

English

10

Getting started using your monitor

You can also adjust these settings using the front control panel. Please see 
"Front panel view" on page 8 for details.

1

  Power

a.  Turn on the power switch.
b.  Press the power button or channel up/down button on the remote control.

2

  Installation Guide

The first time you switch on the monitor, you will be asked to select the language 

and scan for  channels.
Press the 

OK

 key to begin the setup process.

Step 1.  Select the setup language you prefer.
Step 2.  Please select the correct country for signal reception.
Step 3.  Select 

Home

 mode.

Step 4.  Ensure that your co-axial cables are connected correctly before proceeding.
Step 5.  Scan for digital channels and analog channels.
Step 6.  Setup is now complete. You are ready to use your monitor. 

3

  Changing channels

a.  Press 0 - 9 on the remote control to select a channel. The channel changes after 2 

seconds. Press 

OK

 to select the channel immediately.

b.  Pressing the channel ( 

CH 

) up / down button on the remote control will also 

change the channel. 

4

  Adjusting the volume

Adjust the volume level using the ( 

VOL ) 

up/down button on the remote control. 

1

2

4

1

3

Setup may vary due to local broadcast differences.

Summary of Contents for MT200HML






































Reviews: