Altos R520 Installation Configuration Guide
112
Server 10 EM64T on Altos R520 with integrated SAS hardware RAID.
Drivers Required
For SUSE Linux Enterprise Server 10 EM64T Installation, the following device
drivers are required. The drivers can be found in the EasyBUILD 7.1 build 600
(or later)
Device Version
EasyBUILD Version
Integrated SAS
hardware RAID
00.00.03.07
EasyBUILD 7.1 build 600 (or later)
Onboard Chipset
N/A
OS built-in
Onboard Gigabit
Ethernet
7.3.15-NAPI
EasyBUILD 7.1 build 600 (or later)
Onboard VGA
N/A
OS built-in
IOAT
2.15
EasyBUILD 8.0 build 200 (or later)
Onboard USB 2.0
N/A
OS built-in
Software Required
The management utility of integrated SAS hardware RAID can be found in the
EasyBUILD 7.1 build 600 (or later).
Software Version
EasyBUILD
Version
RAID Web Console
2
1.19-00
EasyBUILD 7.1 build 600 (or later)
Configuring integrated SAS hardware RAID
Please refer to the Appendix A. for the integrated SAS hardware RAID
configuration.
Installation Tips
NOTE. The driver of Integrated SAS hardware RAID is required for the SUSE
Linux Enterprise Server 10 EM64T installation. Please install an external USB
floppy drive for applying driver during the OS installation.
1.
Since SUSE Linux Enterprise Server 10 EM64T cannot recognize the
integrated SAS hardware RAID, you need to make a driver diskette from
the EasyBUILD 7.1 build 600 first before the installation.
2.
Boot the system with SUSE Linux Enterprise Server 10 EM64T CD #1.
3.
When you see the boot menu on the screen, select Installation. Then press
F5 and select YES for the driver loading in the installation. Press Enter to
continue.
4.
Follow the instruction to load the integrated SAS hardware RAID driver
from the driver diskette.
5.
At the Installation Settings, select the Software and click on Details. Select
“Package Groups” in the Filter drop-down menu, then click Development
