121 Altos R520 Installation Configuration Guide
# make install
# insmod e1000.ko
3.
Run the YaST2 utility.
# YaST2
4.
Select Network Devices -> Network Card, it will auto detect the Intel
82563EB network controller and help you to configure it.
IOAT driver installation
NOTE. Please update the onboard Gigabit Ethernet driver to version 7.6.5 (or
later) prior to install IOAT driver, you could found the driver from Acer GCSD
website (
http://csd.acer.com.tw/SI/Download2006.nsf/ServerWeb
) or EasyBUILD
8.0 build 100 (or later).
1.
Please remove the old version of IOAT driver from the system manually.
# cd /lib/modules/$(uname -r)/kernel/drivers/dma
# mv ioatdma.ko ioatdma.ko.bak
2.
You can find the IOAT driver in EasyBUILD. Please copy the driver from the
EasyBUILD to HDD first.
Copy the IOAT driver to /tmp
# cd /tmp
# tar zxf ioatdma-<ioat version>.tar.gz
3.
Install the IOAT driver
# cd ioatdma-<ioat version>
# make install
4.
Load the IOAT driver
# modprobe dca
# cd ioatdma
# insmod ioatdma.ko
# modprobe ioatdma
# ll /sys/class/dma/
When IOAT driver installation completed, you could see subdirectories and files
for each subdirectory of /sys/class/dma folder.
RAID Utility Installation
1.
You can find the RAID Web Console 2 in EasyBUILD 7.1. Please refer to
the directory of the RAID Web Console 2 in Software Required section
above and copy the utility from the EasyBUILD 7.1 to HDD first.
