9 Altos R520 Installation Configuration Guide
3.
Expand Drivers -> Altos R520 -> Network adapters -> Intel 82563EB
Gigabit Ethernet Controller, select Windows Server 2008 x64 and click on
Setup.
4.
After installing the driver, you would see Intel(R) PRO/1000 EB Network
Connection with I/O Acceleration listed in Network adapters.
IOAT Driver Installation
The Base System Device with yellow mark in Device Manger is the IOAT device.
After the Gigabit Ethernet controller driver installation completed at previous
step, you would see Intel(R) 5000 Series Chipsets Integrated Device – 1A38
listed in System devices.
VGA Driver Installation
1.
Windows will treat onboard VGA as Standard VGA device. You can find
the ATI ES1000 driver in EasyBUILD. Please insert the EasyBUILD into the
optical drive.
2.
Expand Drivers -> Altos R520 -> Graphics adapters -> ATI ES1000, select
Windows Server 2008 x64 and click on Setup.
3.
Follow the instruction to install the VGA driver and reboot the server
after the driver is installed.
RAID Utility Installation
1.
Please insert the EasyBUILD into the optical drive.
2.
Expand Utilities -> Altos R520 -> Integrated SAS hardware RAID, select
RAID Web Console 2 (Windows) and click on Setup.
3.
Follow the instruction and use the default setting to complete the RAID
Utility Installation.
Network Utility Installation
The PROSet utility for the onboard Gigabit Ethernet controller will be installed
automatically when you installing the onboard Gigabit Ethernet driver.
Windows Server 2008 Enterprise x64 Edition Installation (with
integrated SAS hardware RAID 2)
Below information describes how to manually install Windows Server 2008
Enterprise x64 Edition on Altos R520.
BIOS Required
Altos R520 BIOS
P88
(or later), BMC
63
(or later) and FRUSDR
47
(or later) are
required to support Windows Server 2008.
Drivers Required
For Windows Server 2008 x64 Installation, the following device drivers are
