Altos R520 Installation Configuration Guide
20
Chipset Driver Installation
1.
Please insert the EasyBUILD into the optical drive
2.
Expand Drivers -> Altos R520 -> Chipset, select Windows Server 2008 and
click on Setup.
3.
Follow the instruction to install the driver and reboot the server after the
chipset driver is installed.
Gigabit Ethernet Driver Installation
1.
There is built-in Ethernet controller driver with Widows Server 2008.
Please update the driver with EasyBUILD. Please do the same on both of
the devices.
2.
Please insert the EasyBUILD into the optical drive
3.
Expand Drivers -> Altos R520 -> Network adapters -> Intel 82563EB
Gigabit Ethernet Controller, select Windows Server 2008 and click on
Setup.
4.
After installing the driver, you would see Intel(R) PRO/1000 EB Network
Connection with I/O Acceleration listed in Network adapters.
IOAT Driver Installation
The Base System Device with yellow mark in Device Manger is the IOAT device.
After the Gigabit Ethernet controller driver installation completed at previous
step, you would see Intel(R) 5000 Series Chipsets Integrated Device – 1A38
listed in System devices.
