27 Altos R520 Installation Configuration Guide
VGA Driver Installation
1.
Windows will treat onboard VGA as Standard VGA device. You can find
the ATI ES1000 driver in EasyBUILD. Please insert the EasyBUILD into the
optical drive.
2.
Expand Drivers -> Altos R520 -> Graphics adapters -> ATI ES1000, select
Windows Server 2008 and click on Setup.
3.
Follow the instruction to install the VGA driver and reboot the server
after the driver is installed.
RAID Utility Installation
1.
Please insert the EasyBUILD into the optical drive.
2.
Expand Utilities -> Altos R520 -> Integrated SAS SW RAID, select RAID
Web Console 2 (Windows) and click on Setup.
3.
Follow the instruction and use the default setting to complete the RAID
Utility Installation.
Network Utility Installation
The PROSet utility for the onboard Gigabit Ethernet controller will be installed
automatically when you installing the onboard Gigabit Ethernet driver.
Windows Server 2008 Enterprise Edition Installation (with
onboard SATA RAID)
Below information describes how to manually install Windows Server 2008
Enterprise Edition on Altos R520.
BIOS Required
Altos R520 BIOS
P88
(or later), BMC
63
(or later) and FRUSDR
47
(or later) are
required to support Windows Server 2008.
Drivers Required
For Windows Server 2008 Installation, the following device drivers are required.
Device Version
EasyBUILD Version
onboard SATA RAID 09.32.0207.20
08
EasyBUILD 8.0 build 200 (or later)
Onboard Chipset
8.6.0.1002
EasyBUILD 8.0 build 200 (or later)
Onboard Gigabit
Ethernet
9.12.17.0
EasyBUILD 8.0 build 200 (or later)
Onboard VGA
8.240.50.3000 EasyBUILD 8.0 build 200 (or later)
Onboard USB 2.0
N/A
OS built-in
IOAT
1.2.79.9
EasyBUILD 8.0 build 200 (or later)
